Traditional recipes

3D Print Your Own Bacon for FREE

3D Print Your Own Bacon for FREE

Remember earlier this year when Thrillist reported on that Polaroid camera that literally spits out slices of cheese? Well, if that was life changing, then this is world shattering: Gamma-Go Tech Corp revealed its new 3D printer model, the MS-330 today. It’s the world’s first 3D printer that prints food. But it doesn’t just carve out any old tomato or loaf of bread–it makes bacon. F*CKING BACON.

You heard me right–this thing does thick strips and thin, soft or crispy. It’s got more options than a veteran fry cook at a Waffle House. If you listen closely, you can actually hear angels sing as the printer whips up some sizzlin’ eats. And while the device is still in its infancy, developers say that the MS-330 is already making strides in the culinary industry. Gastro pub owners all over the world are clamboring over one another to get their hands on this tasty high-tech miracle tool.

But that’s not even the coolest part–Chuck Hull, inventor of the 3D printer, has made it clear that college campuses are where the device will undergo serious beta testing. “If it can stand up to the demand of a hungry twenty-one year old with the munchies, then it can service a whole third world country. We’re talking the end to world hunger here.” Because you know your best friend’s roommate can eat enough bacon to satisfy the starving population of the whole Asian subcontinent for an entire year.

3D Tech Corp has 8,000 machines ready to send out for testing. And the best part is that they’re completely FREE. I don’t know about you, but I want my name to be first on that list. Helloooo, easiest breakfast ever. For more information on how to get a MS-330 for your dorm room, email [email protected]aprilfools.com.

The post 3D Print Your Own Bacon for FREE originally appeared on Spoon University. Please visit Spoon University to see more posts like this one. More good stuff from Spoon University here:

  • 12 ways to eat cookie butter
  • Ultimate Chipotle menu hacks
  • Copycat Chick-Fil-A sandwich recipe
  • The easiest 2 ingredient drink recipes, ever
  • 24 must-visit Chicago restaurants from Diners, Drive-ins and Dives

3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.


3D printing in bone now possible

The insanely creative team over at Open3DP have amazed us yet again. Now they have been able to 3D print in bone. For a project with Juliana Meira do Valle and Michael Storey the team developed a way to create a bone mixture that can be 3D printed. The mixture consists of Powdered Bone Meal, Powdered Sugar, MaltoDextrin and urea formaldehyde resin is used as a binder. The team found out that you buy your very own food safe powdered bown meal at your local health or vitamin store, by far the most worrying thing I”ve learned today. The recipe should you want to 3D print your own bone at home:

Powdered Bone Meal &mdash 4-5 parts by weight.
UF plastic resin glue  &mdash 1 part by weight.

After five weeks of testing the team was sucessfully able to 3D print the bone 3D prints needed for the project. This is still an early test and by no means does this mean you can take your 3D printer with you on your next ski vacation, just in case. But, it is another piece of groundbreaking work by the Open3DP team at the Solheim Lab. You can read more here.